日本SMC低速摩擦气缸*现货

日本SMC低速摩擦气缸*现货

由于汽缸结合面被蒸汽冲刷或腐蚀出沟痕，选用适当的焊条把沟痕添平，用平板或平尺研出痕迹，研刮焊道和结合面在同一平面内。汽缸结合面变形较大或是漏汽严重时，在下缸的结合面补焊一条或两条10—20mm宽的密消除间隙封带，然后用平尺或是扣上缸测量，并涂红丹研刮，直到消除间隙。此操作的工艺也很简单，焊前预热汽缸至150℃，然后在室温下进行分段退焊或跳焊。选用奥氏体焊条，如A407、A412，焊后用石棉布覆盖保温缓冷。待冷却室温后进行打磨修刮。

日本SMC低速摩擦气缸*现货

MQMLB10-100D
MQMLB10-10D
MQMLB10-15D
MQMLB10-22D
MQMLB10-30D
MQMLB10-45D
MQMLB10-60D
MQMLB10-75D
MQMLB10H-100D
MQMLB10H-15D
MQMLB10H-30D
MQMLB10H-45D
MQMLB10H-75D
MQMLB16-100D
MQMLB16-15D
MQMLB16-20D
MQMLB16-22D
MQMLB16-30D
MQMLB16-45D
MQMLB16-50D
MQMLB16-60D
MQMLB16-75D
MQMLB16-80D
MQMLB16H-100D
MQMLB16H-15D
MQMLB16H-20D
MQMLB16H-30D
MQMLB16H-40D
MQMLB16H-45D
MQMLB16H-75D
MQMLB20-100D
MQMLB20-15D
MQMLB20-22D
MQMLB20-45D
MQMLB20-60D
MQMLB20-75D
MQMLB20H-100D
MQMLB20H-15D
MQMLB20H-25D
MQMLB20H-30D
MQMLB20H-75D
MQMLB25-100D
MQMLB25-10D
MQMLB25-15D
MQMLB25-30D
MQMLB25-45D
MQMLB25-50D
MQMLB25-60D
MQMLB25-75D
MQMLB25H-100D
MQMLB25H-15D
MQMLB25H-30D
MQMLB25H-75D
MQMLB6-15D
MQMLB6-20D
MQMLB6-30D
MQMLB6-45D
MQMLB6-60D
MQMLC20-100D
MQMLC25-100D
MQMLD10-60D
MQMLD16-100D
MQMLD16-15D
MQMLD16-30D
MQMLD16-45D
MQMLF20-75D
MQMLL20H-100D